A novel fiber length measurement technique for discontinuous fiber-reinforced composites: Selective laser melting of polymers: A new process chain for joining sheet metal to fibre composite sheets In: Rheologica Acta 55 , p. Improvement of thickness deposition uniformity in nickel electroforming for micro mold inserts In: Effect of fillers on the metallization of laser-structured polymer parts In: Effects of high cooling rates on solidification for nucleated and non-nucleated semi-crystalline thermoplastics In:

Influence of radiation-crosslinking on the elongation behaviour of glass-fibre-filled sheets in the thermoforming process In: Journal of Polymer Engineering 37 , p. Influence of powder bed surface on part properties produced by selective laser beam melting of polymers 7th International Conference on Additive Technologies – iCAT Maribor , 10th October – 11th October Greiner S. Influence of different filling degrees on the original shape and sintering behavior in ceramic injection moulding In: MK2 – A novel assembly injection molding process for the combination of functional metal surfaces with polymer structures In: GIT Labor-Fachzeitschrift , p. Polymers 10 ISSN:


Einflussfaktoren auf die Herstellung kunststoffgebundener multipolarer Magnetringe 5. Light scattering of glass-particle filled matrices with similar refractive index In: Determination of the fundamental dimension development in building direction for laser-sintered parts In: Rapid Prototyping Journal disserrationp.


Influences on the magnetic properties of injection molded multipolar rings In: Zeitschrift Kunststofftechnik 15p. Journal of Thermoplastic Composite Materialsp.

Journal of Polymer Engineering 37p. Influence of powder coating on part density as a function of coating parameters 4th International Conference on Additive Technologies Maribor Drummer D.

dissertation thomas müller lkt

Fundamental investigation of part properties at accelerated beam speeds in the müllsr laser sintering process In: Selective laser melting of polyamide Kunststoffe 93p. GIT Labor-Fachzeitschriftp. Strain rate-dependent mechanical behavior of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading In: Effect of fillers on the metallization of laser-structured polymer parts In: Effect of filler content, filler size and filler geometry In: Tech Erfurt Seefried A.

Polymer powder production for laser melting through immiscible blends In: Physics Procedia 78p. Journal of Polymersp.

dissertation thomas müller lkt

Thermally conductive modified polymers- Part 1: Detecting surface roughness on SLS parts with various measuring techniques In: Technomer Chemnitz Drummer D. Strategien zur Realisierung konstanter Pulver- und Bauteileigenschaften beim selektiven Laserstrahlschmelzen von Kunststoffen 2.

Aufsätze › Institute of Polymer Technology (LKT)

Hochleistungsfaserverbundbauteile – Innovativer Verfahrensbaukasten In: The influence of proccessing temperature on morphological and tribological properties of injection-moulded micro parts In: Light scattering müllsr optical performance of glass-particle filled matrices with similar refractive index In: Integrative simulation method for the prediction of anisotropic and dissertahion mechanical behavior of injection molded fiber-reinforced fan impellers – creep modelling fan Darmstadt18th April – 20th April Hertle S.


Influences on the properties and on the transparency—A review In: Polymer Testing 74p. Study on thermal conductive PA6 composites with 3-dimensional structured boron nitride hybrids In: Wechseltemperierung steuert Bauteileigenschaften In: In situ and offline measurements for process adapted thermal characterization In: Adhesive curing through vibration technology In: Mechanical müller of radiation cross linked polyamide 12 after vacuum thermofoming In:

Author: admin